Back to Release page

Release Notes for STM32 Standard Peripherals Library Utilities (Utilities)

Copyright 2011 STMicroelectronics

 

Contents

  1. STM32 Standard Peripherals Library Utilities update History
  2. License

STM32 Standard Peripherals Library Utilities update History


V4.5.0 / 07-March-2011

Main Changes

  • stm32_eval_sdio_sd.c\.h: driver improvement
    • SD Clock increased to 24MHz to improve the data transfer performance.
    • Add new functions to check the SDIO peripheral and SD Card status at any time: SD_WaitReadOperation(), SD_WaitWriteOperation(). The software sequence is little bit changed but without any impact on driver API. For more details, refer to the stm32_eval_sdio_sd.c driver description.
    • Add new structure containing the SD Status register parameters. This structure is called by the           SD_SendSDStatus() function.
    • Transfers mode updated
      • Read/Write Block using Polling and DMA modes
      • Read/Write Multi Blocks using DMA mode only
      • Interrupt mode removed
    • Data transfer functions are managing only fixed Block size (512-byte) 
  • STM32100B-EVAL
    • stm32100b_eval_cec.c: fix some strict ANSI-C errors
  • STM32100E-EVAL
    • stm32100e_eval_cec.c: fix some strict ANSI-C errors

V4.4.0 / 31-December-2010

Main Changes

  • Add new directory for STM32L152-EVAL board containing the following files:
    • stm32l152_eval.h/.c, stm32l152_eval_lcd.h/.c, stm32l152_eval_glass_lcd.h/.c, stm32l152_eval_i2c_ee.h/.c
  • Add support for the STM32100E-EVAL Rev B: SPI FLASH CS pin "sFLASH_CS_PIN" changed from PB.02 to PE.06.
  • stm32100e_eval_lcd.h/.c: Add support for "LCD_ILI9325" LCD controller.
  • stm32100e_eval_fsmc_onenand.h/.c driver updated to correct asynchronous and synchronous read operations procedures.

4.3.0 - 10/15/2010

  1. General
  • I2C EEPROM, Temperature Sensor and IOE Expander drivers updated to use the DMA for read/write transfer and add more robustness
  • SD Card (SDIO) driver updated to add more robustness
  • SPI Flash and SD Card (SPI) drivers: SPI MISO pin configuration changed to Input Floating 
  1. Utilities
  • Add new directory for STM32100E-EVAL board containing the following files:
    • stm32100e_eval.h/.c, stm32100e_eval_lcd.h/.c, stm32100e_eval_cec.h/.c, stm32100e_eval_fsmc_onenand.h/.c, stm32100e_eval_fsmc_sram.h/.c, stm32100e_eval_ioe.h/.c
  • Common
    • stm32_eval_sdio_sd.c: Update the DMA End of Transfer Check loop inside the SD_ReadBlock(), SD_WriteBlock(), SD_ReadMultiBlocks() and SD_Write MultiBlocks().
    • stm32_eval_i2c_ee.c/.h
      • Enhanced sEE_WaitEepromStandbyState() function for more robustness.
      • Enhanced Read and Write operations to manage I2C limitations.
      • Add Timeout management with user callback implementation which allows recovering from I2C bus errors.
      • Add critical sections user callbacks allowing to disable then enable interrupts when I2C operation require to be not interrupted.
    • stm32_eval_i2c_tsensor.c/.h
      • Enhanced I2C communication functions by using DMA for registers Read and Write operations.
      • Add Timeout management with user callback implementation which allows recovering from I2C bus errors.
  • STM32100B_EVAL
    • stm32100b_eval.h: Add LM75 DMA defines.
    • stm32100b_eval_lcd.c: Change "SPI_FLASH" by "sFLASH" in LCD_DrawBMP() function.
  • STM3210B_EVAL
    • stm3210b_eval.h: Add LM75 DMA defines.
    • stm3210b_eval_lcd.c: Change "SPI_FLASH" by "sFLASH" in LCD_DrawBMP() function.
  • STM3210C_EVAL
    • stm3210c_eval.h: Add EEPROM driver Timeout define.
    • stm3210c_eval_lcd.c: Change "SPI_FLASH" by "sFLASH" in LCD_DrawBMP() function.
    • stm3210c_eval_i2c_ioe.c
      • Enhanced I2C communication functions by using DMA for registers Read and Write operations.
      • Add Timeout management with user callback implementation which allows recovering from I2C bus errors.
      • change IOE_I2C_SPEED from "400000" to "300000".
  • STM3210E_EVAL
    • stm3210e_eval.c: change "void SD_WaitForDMAEndOfTransfer(void)" to "uint32_t SD_DMAEndOfTransferStatus(void)".
    • stm3210e_eval.h: Add LM75 DMA defines.
    • stm3210e_eval_fsmc_nand.h: remove "NAND_CMD_AREA_TRUE1" define.
    • stm3210e_eval_fsmc_nand.c: Update FSMC timing in NAND_Init() function to be aligned with AN2784 application note.
    • stm3210e_eval_fsmc_nor.c
      • NOR_Init() function: add FSMC_AsynchronousWait field to FSMC_NORSRAMInitStructure 
    • stm3210e_eval_fsmc_sram.c
      • Update FSMC timing in SRAM_Init() function to be aligned with AN2784 application note.
      • SRAM_Init() function: add FSMC_AsynchronousWait field to FSMC_NORSRAMInitStructure 
    • stm3210e_eval_lcd.c
      • LCD_FSMCConfig() function: add FSMC_AsynchronousWait field to FSMC_NORSRAMInitStructure 

4.2.0 - 04/16/2010

  1. General
  • I2C EEPROM driver update to use the DMA to perform data transfer to/from EEPROM memory.
  1. Utilities
  • STM32_EVAL
    • stm32_eval_i2c_ee.c: updated to use the DMA to perform data transfer to/from EEPROM memory. For more details, refer to the description provided within this file.
    • stm3210c_eval.c: add low level functions to configure the DMA (needed for I2C EEPROM driver)
    • stm3210c_eval_ioe.c: add a delay in IOE_TS_GetState() function to wait till the end of ADC conversion
    • stm3210e_eval_fsmc_nor.c: add PD6 pin configuration in NOR_Init() function
    • stm3210b_eval_lcd.c: remove the second ";" from "static void PutPixel(int16_t x, int16_t y);;" 

4.1.0 - 03/01/2010

  1. General
  • Add support for STM32 Low-density Value line (STM32F100x4/6) and Medium-density Value line (STM32F100x8/B) devices.
  • Add support for the STMicroelectronics STM32100B-EVAL evaluation board.
  1. Utilities
  • STM32_EVAL
    • Add new directory "Common" containing a common drivers for all STM32 evaluation boards: fonts.h/.c, stm32_eval_i2c_ee.h/.c, stm32_eval_spi_flash.h/.c, stm32_eval_i2c_tsensor.h/.c, stm32_eval_spi_sd.h/.c and stm32_eval_sdio_sd.h/.c
    • Add new driver for the STM32100B-EVAL managing Leds, push button and COM ports.
    • New HDMI CEC High level driver.
    • For all LCD drivers new fonts has been added.
    • New FSMC memories drivers for STM3210E-EVAL board: stm3210e_eval_fsmc_sram.h/.c, stm3210e_eval_fsmc_nor.h/.c and stm3210e_eval_fsmc_nand.h/.c.

License

The enclosed firmware and all the related documentation are not covered by a License Agreement, if you need such License you can contact your local STMicroelectronics office.

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

For complete documentation on STMicroelectronics Microcontrollers visit www.st.com